- You can check the "tools" , "tool names" and "brands" under the form area.
Tool Bundle for Denso Injectors
Injector Simulator + Nozzle Tester + Denso Filter Remover + 3 Pin Nut Opener + Denso Opening Tool
for G2 & G3 injectors
Tool Bundle for VDO Injectors
Injector Simulator + Nozzle Tester + Solenoid Tester + VDO Nut Opener + VDO Opening Tool
for all VDO injectors
Tool Bundle for Bosch 0445110 Series Injectors
Injector Simulator + Nozzle Tester + Nut Opener + Opening Tool + Valve Cap Remover + Fiber Assembling Tool + Valve Cap Lapping Machine + Digital Microscope + Solenoid Adjustment Tool + Lapping Paste + Digital Gauge for Solenoid Adjustment Tool
Tool Bundle for Bosch Piezo Injectors
Injector Simulator + Nozzle Tester + Opening Tool + Piezo Valve Repairing Set - includes Piezo Valve Lapping Motor + Piezo Air Remover and Valve's Pin Adjustment Press + Mechanic Gauge + Pin Lapping Plate + Lapping Paste + 3000 Micron and 5000 Micron Sand Paper + Leakage Adjuster
Tool Bundle for Bosch 0445120 Series Injectors
Injector Simulator + Nozzle Tester + Nut Opener + Opening Tool + Valve Cap Remover + Fiber Assembling Tool + Valve Cap Lapping Machine + Digital Microscope + Solenoid Adjustment Tool + Lapping Paste + Digital Gauge for Solenoid Adjustment Tool + Inline Connector + Inline Connector with Angle
Tool Bundle for Delphi Injectors
Injector Simulator + Nozzle Tester + Opening Tool
for all Delphi injectors
Tool Bundle for CAT C7-C9-HEUI Injectors
HEUI Injector Simulator + Nozzle Tester + HEUI - C7 - C9 Bench Adaptor Equipment + C7 Nozzle Tester Adaptor + Opening Tool + C9 Nozzle Tester Adaptor + C7 - C9 Removal Kit+ HEUI Removal Kit
Tool Bundle for CAT C13-C15-C18 Injectors
Injector Simulator + Nozzle Tester + C13 - C15 - C18 Nozzle Tester Adaptor + C13 - C15 - C18 Removal Kit + Opening Tool
Tool Bundle for Perkins 2645A Series Injectors
Injector Simulator + Nozzle Tester + Removal Kit 1 + Removal Kit 2 + Opening Tool + Measuring Tools
Tool Bundle for All Injector Models
Tool Bundle for: Denso Injectors + VDO Injectors + 0445110 Series Bosch Injectors + 0445120 Series Bosch Injectors + Bosch Piezo Series Injectors + Delphi Injectors + CAT C7-C9-HEUI Injectors + CAT C13-C15-C18 Injectors + Perkins 2645A Series Injectors ( Same products in the tool bundle are excluded )
Injector Simulator
$ 500
Used for BOSCH, DENSO, DELPHI, VDO CONTINENTAL, PIEZO INJECTORS. Comes with all the injector connection plugs for each OEM brands.
Nozzle Tester
$ 500
Used for BOSCH, DENSO, DELPHI, VDO CONTINENTAL, CUMMINS, PERKINS, CAT, PIEZO INJECTORS. Comes with two connection kit to fit all injectors.
Denso Filter Remover
$ 50
Used for all Denso injectors. It is used for taking out the old filter in order to replace with a new one. If the filter filled with dirt and blocked, it damages the valve.
Denso 3 Pin Nut Opener
$ 50
Used for all Denso injectors. It is used for opening the nut in order to reach the valve underneath the nut. It is the safest way to open the nut without damaging the valve.
Denso Opening Tool
$ 50
It is used as a tool to place Denso injectors while assembling / disassembling. Specifically produced for Denso injectors to prevent any damages to the injectors.
VDO Nut Opener
$ 50
Used for all VDO Continental injectors. It is used for opening the nut in order to reach the valve underneath the nut. It is the safest way to open the nut without damaging the valve.
VDO Opening Tool
$ 50
It is used as a tool to place VDO Continental injectors while assembling / disassembling. Specifically produced for VDO injectors to prevent any damages to the injectors.
Solenoid Tester
$ 250
Used for BOSCH, DENSO, DELPHI, VDO CONTINENTAL, CUMMINS, PERKINS, CAT, PIEZO INJECTORS. It is used for testing the solenoid/sensor part of the injectors.
Bosch Opening Tool
$ 50
It is used as a tool to place 0445110 series, Piezo and 0445120 series injectors while assembling / disassembling the injector. Specifically produced for Bosch injectors to prevent any damages to the injector.
Bosch Nut Opener
$ 50
Used for all Bosch injectors. It is used for opening the nut in order to reach the valve underneath the nut. It is the safest way to open the nut without damaging the valve.
Fiber Assembling Tool
$ 50
It is used as a tool for 0445110 series and 0445120 series injectors while assembling shims and fibers to the solenoid part of the injectors.
Valve Cap Remover
$ 50
It is used as a tool to remove the valve cap out of the 0445110 series Bosch injectors. Specifically produced for 0445110 series injectors to prevent any damages to the valve cap.
Valve Lapping Machine
$ 400
It is used as a tool to repair the valve cap for both 0445110 series and 0445120 series Bosch injectors. The little scratches on the valve cap will cause leakage but you can repair them by using our lapping machine.
Digital Microscope
$ 55
It is used for finding the damaged parts and scratches on any spare part in order to repair them. We specifically use it while repairing the valve cap for 0445110 series and 0445120 series injectors.
Solenoid Adjustment
$ 50
It is used for adjusting the solenoid for triggering. Used on both 0445110 series and 0445120 series injectors. Usually, a digital gauge is assembled on this tool to adjust it accurately.
Digital Gauge
$ 150
It is used for measuring and adjusting the solenoid for the triggering. Used on both 0445110 series and 0445120 series injectors. It is assembled on Solenoid Adjustment Tool.
Lapping Paste
$ 20
It is used while repairing the valve cap for Bosch injectors. The little scratches on the valve cap will cause leakage. You can repair them by applying the lapping paste on the damaged part while using the lapping machine.
Piezo Valve Repairing Set
$ 1500
It is used as a tool to repair the piezo valve for the Bosch Piezo Injectors. It includes Piezo Valve Lapping Motor +Piezo Air Remover and Valve's Pin Adjustment Press+ Mechanic Gauge + Pin Lapping Plate + Lapping Paste + Sand Paper
Piezo Valve Lapping Motor
Inside the Piezo Valve Repairing Set
It is used as a tool to repair the piezo valve for the Bosch Piezo Injectors. Apply a little bit of lapping paste on the pin and place it on the valve with its spring then put the valve on the lapping machine and special tool repairs it for you.
Leakage Adjuster
$ 50
It is used at test benches and plugged into Bosch Piezo Type injector's return part to get accurate test results. Specifically produced for Bosch Piezo type injectors with enough resistance of bar pressure on the tubes.
Bosch Nut Opener
$ 50
Used for all Bosch 0445120 series injectors. It is used for opening the nut in order to reach the valve underneath the nut. It is the safest way to open the nut without damaging the valve.
Valve Cap Remover
$ 50
It is used as a tool to remove the valve cap out of the 0445120 series Bosch injectors. Specifically produced for 0445120 series injectors to prevent any damages to the valve cap.
Inline Connector
$ 50
It is used for 0445120 series injectors for plugging them to the nozzle tester. It is specifically produced for 0445120 series injectors in order to get full performance on the nozzle tester.
Inline Connector (Angle)
$ 50
It is used for 0445120 series injectors for plugging them to the nozzle tester. It is specifically produced for 0445120 series injectors with an angle in order to get full performance on the nozzle tester.
Delphi Opening Tool
$ 50
It is used as a tool to place all kinds of Delphi injectors while assembling / disassembling the injector. Specifically produced for Delphi injectors to prevent any damages to the injector.
HEUI Injector Simulator
$ 500
Used for CAT C7 - C9 - HEUI injectors. Comes with all the injector connection plugs for each injector type.
HEUI - C7 - C9 Bench Adaptor Equipment
$ 2000
Used for CAT C7 - C9 - HEUI injectors. It can be assembled to all kinds of test benches. Specifically produced for testing CAT HEUI - C7 - C9 injectors.
HEUI Opening Tool
$ 50
It is used as a tool to place all kinds of HEUI injectors while assembling / disassembling CAT C7 - C9 - HEUI injectors. Specifically produced for CAT injectors to prevent any damages to the injector.
C7 Nozzle Tester Adaptor
$ 50
Specifically produced for CAT C7 injectors. It is used as an adaptor to assemble the C7 injectors to the nozzle tester.
C9 Nozzle Tester Adaptor
$ 50
Specifically produced for CAT C9 injectors. It is used as an adaptor to assemble the C9 injectors to the nozzle tester.
C7 - C9 Removal Kit
$ 50
It is used as a tool while assembling / disassembling CAT C7 - C9 injectors. Specifically produced for CAT C7 - C9 injectors to prevent any damages to the injector.
HEUI Removal Kit
$ 50
It is used as a tool while assembling / disassembling CAT HEUI injectors. Specifically produced for CAT HEUI injectors to prevent any damages to the injector.
C13 - C15 - C18 Injector Simulator
$ 500
Used for CAT C13 - C15 - C18 injectors. Comes with all the injector connection plugs for each injector type.
C13 - C15 - C18 Opening Tool
$ 50
It is used as a tool to place CAT C13 - C15 - C18 injectors while assembling / disassembling C13 - C15 - C18 injectors. Specifically produced for CAT injectors to prevent any damages to the injector.
C13 - C15 - C18 Nozzle Tester Adaptor
$ 50
Specifically produced for CAT C13 - C15 - C18 injectors. It is used as an adaptor to assemble the C13 - C15 - C18 injectors to the nozzle tester.
C13 - C15 - C18 Removal Kit
$ 50
It is used as a tool while assembling / disassembling CAT C13 - C15 - C18 injectors. Specifically produced for C13 - C15 - C18 injectors to prevent any damages to the injector.
Perkins Removal Kit 1
$ 50
It is used as a tool while assembling / disassembling Perkins 2645A injectors. Specifically produced for 2645A series injectors to prevent any damages to the injector.
Perkins Removal Kit 2
$ 50
It is used as a tool while assembling / disassembling Perkins 2645A injectors. Specifically produced for 2645A series injectors to prevent any damages to the injector.
Perkins Measuring Tools
$ 300
It is used as a tool to measure the gap on Perkins 2645A injectors. Specifically produced for 2645A series injectors to prevent any damages to the injector.
Perkins Opening Tool
$ 50
It is used as a tool to place Perkins 2645A series injectors while assembling / disassembling 2645A series injectors. Specifically produced for Perkins injectors to prevent any damages to the injector.
